Nonmagnetic Stylus [Nissin Sangyo]

When put a magnet on the table stand of the machine tools,
work is magnetized. And causing measurement errors.
You can high-precision measurement
if you use the non-magnetic stylus (Patent No. 40722822) .

Specifications

Nonmagnetic Stylus for the Point Finder series
Model	Tip	Length	Product Coverage	Screw Size
ST-1×15NM	φ1	15mm	Point Finder Point Finder with buzzr Water-proof Point Finder Point Finder-L for lathe(*2)	M3×0.5
ST-1×20NM	φ1	15mm
ST-0.7×40NM	φ0.7	40mm
ST-1×40NM	φ1
ST-1×40NML	φ1
ST-2×40NM	φ2
ST-2×40NML	φ2
ST-3×40NM	φ3
ST-4×40NM	φ4
ST-6×40NM	φ6
ST-1×60NM	φ1	60mm
ST-2×60NM	φ2
ST-4×60NM	φ4
ST-6×60NM	φ6
ST-1×80NM	φ1	80mm
ST-2×80NM	φ2
ST-3×80NM	φ3
ST-4×80NM	φ4
ST-6×80NM	φ6

ST-1×100NM*	φ1	100mm*	Point Finder Point Finder with buzzr Water-proof Point Finder Point Finder-L for lathe(2) 100mm,150mm, it is enable to be attached to the Point Finder and 　 Water-proof Point Finder, but its repeatability is not guaranteed.
ST-2×100NM*	φ2
ST-3×100NM*	φ3
ST-4×100NM*	φ4
ST-6×100NM*	φ6
ST-3×150NM*	φ3	150mm*
ST-4×150NM*	φ4	150mm*
Internal Contact Type Point Finder-i (*1)
ST-3×29NM	φ3	29mm	Point Finder-i Water-proof Point Finder-i
ST-6×29NM	φ6	29mm	Point Finder-i Water-proof Point Finder-i
Point Finder Compact Type
ST-2×23.5NM	φ2	23.5mm	Point Finder Compact Type
ST-3×23.5NM	φ3	23.5mm	Point Finder Compact Type

*100mm,150mm, it is enable to be attached to the Point Finder and
　Water-proof Point Finder, but its repeatability is not guaranteed.
　 (*1)：Please note that if a stylus longer than the standard (30 mm or more) is attached to the
internal contact method, the deflection will increase and accuracy cannot be guaranteed.
(*2)：The lathe point finder cannot be corrected, so please do not replace the stylus by yourself.
For more details, refer to 【Point Finder series】

Nonmagnetic Stylus for the Centering Gauge Swing Type
Model	Tip	Length	Product Coverage	Screw Size
ST-1×50N	φ1mm	50mm	Centering Gauge Swing Type	M4×0.7mm 　　 2 single-ended wrenches (5.5mm / 6mm) are included with Centering Gauge Swing Type.
ST-2×50N	φ2mm
ST-3×50N	φ3mm
ST-4×50N	φ4mm
ST-6×50N	φ6mm
ST-1×100N	φ1mm	100mm
ST-2×100N	φ2mm
ST-3×100N	φ3mm
ST-4×100N	φ4mm
ST-6×100N	φ6mm
ST-6×150N		150mm
ST-6×200N*		200mm

*As for the stylus 'ST-6×200N', it is enable to be attached to the Centering Gauge Swing Type,
　but its repeatability is not guaranteed.
　For more details, refer to 【Centering Gauge Swing Type】

Dimensions

Nonmagnetic Stylus for the External contact type Point Finder
・ST-1×20NM	・ST-0.7×40NM

・ST-1×40NM	・ST-2×40NM

・ST-1×40NML	・ST-2×40NML

・ST-3×40NM	・ST-4×40NM

・ST-6×40NM

・ST-4×60NM

・ST-3×80NM 　　　　　　　　　　　　　　　　※Guaranteed repeatability ±1μm

・ST-6×80NM　　　　　　　　　　　　　　　　　※Guaranteed repeatability ±1μm

・ST-1×100NM　　　　　　　　　　　　　　　　※Repeatability is guaranteed only for the special specification type.