|
|
A professional manufacturer of three-dimensional measuring devices for the on-machine measurement and in-flight measurement |
Products in general - question that corresponds to the multiple product -
- Q1 ： Difference in "external contact type" and "internal contact type"?
Is there anything to be aware of when selecting? - Q2 ： What is "the repetition precision?"
- Q3 ： Is it possible to install other than the standard stylus? Please tell me about length and size.
- Q4 ： What is the difference between nonferrous metals and nonmetals?
- Q5 ： What is the "centering"?
- Q6 ： What does it mean that the machine tool magnetizes?
- Q7 ： What is the difference between the swing type of the centering gauge and the point finder?
- Q8 ： Why is the repeatability the best in the world?
- Q9 ： Why is repeatability necessary?
- Q10： The temperature difference between day and night is more than 20 degrees,
but will not affect the measurement? - Q11： Since the current-carrying type allows current to flow through the machine,
will it cause electrolytic wear? - Q12： I measure casting. Iron, aluminum, brass etc. Why, I am using external contact type,
but sometimes it does not light up. - Q13： I do not have a battery for a year.
- Q14： I want to buy a lithium battery even in foreign countries.
- Q15： I will bring it overseas. Could you certify the origin of the sensor I am using now?
- Q16： Can you measure the loose slope and the angle of tight slope accurately with the mold?
- Q17： Although we use a sign vice to process mold parts and accurately measure the vernier,
an error comes out and the angle is not clearly understood. - Q18： I want to measure the radius r and the x and y coordinates of the center of the outer
contour surface of the template processed as programmed. - Q19： Copying a three-dimensional processing curved surface at the point file fin loaders,
we would like to express the figure three-dimensionally.
I want to measure automatically if possible.
Stylus deviates coordinates of the surface in contact with the center when the stylus ball
striking the curved surface,or not than not be measured correctly. - Q20： Can I adjust and calibrate the measuring instrument after use?
- Q21： The lamp does not light, what is the cause?
- Q22： The point finder exceeded the Z axis when measuring the plane.
The stylus is slightly bent but it is not broken. LED does not light up.
Can I sell the LED because I want to replace the LED?
Questions about the non-magnetic stylus
- Q1 ： Please tell me the difference between "non-magnetic stylus," said general stylus
(steel stylus, etc.). - Q2 ： Can I exchange the stylus myself?
- Q3 ： For the adjustment of the stylus please refer to Q3 below.
- Q4 ： There is a sticker in the box of the stylus,
"Please be careful not to use it except for our products", so I will ask you a question. - Q5 ： the tip of the stylus would not be of a cylindrical shape is better than sphere?
- Q6 ： The stylus broke. Is it repairable?
Questions about Point Finder
- Q1 ： What is waterproof IP67 (IEC standard)?
- Q2 ： Can I use a point finder with a horizontal machining center?
- Q3 ： Can I use the waterproof type while keeping it in ATC?
- Q4 ： I would like to control my own machine, but can I get a signal from the point finder?
- Q5 ： I plan to attach the point finder (PTN-10) to the holder with the nut diameter φ35,
but if the outer diameter is Ø 35 or more, I will think about another method because
the wrench does not pass. - Q6 ： Can you repair the point finder any number of times?
- Q7 ： It was a point guide that I bought for over 20 years ago
(at the time of purchasing a machining center), can you repair? - Q8 ： Sometimes the LED will remain lit even though I use it only for one year
since I bought WPi (waterproof type) - Q9 ： I would like to follow three-dimensionally machined curved surfaces with a point finder
and show the figure in three dimensions. I would like to measure automatically if possible.
The coordinates when the stylus hits the curved surface and the coordinates of the center of the
stylus sphere deviate and may not be measured correctly. - Q10： We are using mineral cutting oil, but the LED of WPi has stayed lit.
- Q11： I plan to buy a three-dimensional measuring instrument. Which is better, addition of a
machining center? - Q12： Why is it different from the dimension of the hole measured with the point finder and calipers.
Questions about centering gauge Swing Type
Questions about the tool setter
- Q1 ： I would like to measure the drill length of φ0.05 with a tool setter. Which is better, M-50 or i-50?
- Q2 ： Which is better the M-50 and i-50 ,tool setters should be used to measure of φ6mm endmill?
- Q3 ： What is the difference between M-50 and i-50 of Tool Setter?
- Q4 ： What is the difference between Tool Setter S-50 and M-50?
- Q5 ： Why is the tool setter used both dialing and energizing but different dimensions?
- Q6 ： I hit the cutting edge of the tool. Is it repairable?
Questions about centering gauge
Questions about other products
Other
- in preparation
用語集
Nissin Sangyo Co., Ltd. ―Measuring Instruments for The Machine Tools―Otsu 45-2, Kitamachi, Kanazawa, Ishikawa, Japan 920-0055 TEL：+81-76-223-1031 FAX：+81-76-223-1281
Copyright © 2007-2009 Nissin Sangyo Co., Ltd. All rights reserved.